READ THIS!

Watch video below as well.


Advanced user installation required: Adequate welder and welding skills are required to install! You're putting yours and other peoples' life at risk if you do not properly install this! You may need to notch, grind, drill or modify this plate slightly for your specific Montero - There's not much walk-through information out there. This is a builder type part. Take it to a fab shop or 4wd shop if you're uncertain. Most mechanic shops wont touch something like this. Bad welds result in your own risk, danger to others and just not good stuff, so be careful. we aren't responsible for what you do with this thing. 


The first and only winch plate designed for ease of installation on the Mitsubishi Montero in the US. Previously you could shop around and find a winch plate close to what you needed, hack it up a whole bunch and then retrofit it on your frame. This plate locates to the frame, with two large holes that line up with the frame horns. Some of the tools required to install this are a grinder and welder. Once complete your winch will sit properly between the frame rails as Mitsubishi intended. In other countries the Montero came with a winch from the factory. The factory winch was PTO driven from the transfer case and mounted in the same spot this plate is designed for.This results in a low CG pull that will extract your truck from the most stuck situations. Other options will have your winch up on a poorly mounted aftermarket bumper, putting the pull at higher CG, more strain on the frame and more likelihood of tearing a bumper mount. Slow and low, that is the tempo!


These plates are proudly designed and manufactured in America.


Some notes on our winch plate:


All frames are subjected to different elements and conditions, this plate has locating holes based off of factory trucks from Arizona that have never been subjected to corrosion or collision, your vehicle may have suffered any number of situation before your ownership, we do not guarantee this unit will fit perfect on every truck, it is far above and beyond anything you can get elsewhere in terms of a direct solution. Many hours of fitment testing and seeking out stock vehicles lacking damage brought this unit to the market. Please understand buying does not provide you with a simple bolt-in solution, if one could exist, we would've made it.


This thick steel plate is designed to locate to your frame, weld in place and support most winches on the market. This winch plate is designed to work with our skid plates, works with stock skid plates, (some trimming may be required) and works well with our modular bumper system on both the gen 1 and 2 Monteros. Users who install without a body lift can expect interference in the areas around the transmission cooler, remote solenoid mounting is recommended.  Check out the video below for lots of information!


Happy trails!

Winch Specifications:

The new ENGO SR Series winches provide all the best features you
would want in a winch. Using state of the art Series Wound Motors,
efficient 3-Stage planetary gear train, automatic load-holding brake,
rugged hand remote, freespooling, power In and Out, stainless steel
fasteners and a standard 4 Way Galvanized Roller Fairlead. The new
SR Series offers the perfect balance of speed and power giving you
the performance you need for your recovery applications.

ENGO is proud to provide the SR Series winches for Jeep and Truck
applications with a limited lifetime warranty on mechanical
components with a 1-Year warranty on electrical components.

ENGO has a SR Series recovery winch to handle every job imaginable
and offers the best all around performance and value of any winch
available.

Specifications
Rated Line Pull12,000 lb. (5454kg)
Motor6.0 HP, Series Wound
Gearing3-Stage Planetary
Gear Ratio265:1
IP RatingIP 67
BrakeAutomatic Load Holding
ClutchFree Spooling
FairleadPolished Aluminum Hawse
Cable or Rope3/8 x 85" Synthetic Rope
Net Weight65 lb. (30kg)
Mounting Bolt Pattern10" x 4.5"
Warranty

Limited Lifetime/ 1-Year Electrical





Write a review

Please login or register to review

ADHD Adventure Driven Hardcore Design - Easy Weld-in American Made Winch Plate with winch options.

  • $135.00
  • $111.00

  • Ex Tax: $111.00

Available Options


Related Products

ADHD - Adventure Driven Hardcore Design | Mitsubishi 4WD Body Lift

ADHD - Adventure Driven Hardcore Design | Mitsubishi 4WD Body Lift

The quickest, easiest way to clear 33's on a budget. Our local friend Ernest makes up body lift kits..

$175.00 Ex Tax: $175.00

Tags: ADHD, armor, sale